How to Print with Vista

Do not install iPrint!

1. Before you start make sure you know what your iPrint password is. Make sure that you are connected to the internet. If you do not know it the Help Desk, 459 JRCB 422-3884 can reset it for you. We are open from 8am-5pm Monday-Friday.

2. Go to Start> Control Panel

   

3. Inside of Control Panel go to Printers

   

4. Click on Add a Printer.

   

5. Click Add a Network, Wireless or Bluetooth Printer

   

6. Stop the Search and then click on "The printer that I want isn't listed"

   

7. Type in the URL depending on the printer you want to install and then click next.

   For the 3rd floor by the restrooms enter: http://128.187.43.79/ipps/JRCB380-HP9000
   For the 3rd floor by the reference desk enter: http://128.187.43.79/ipps/JRCB380-Ref-HP9000
   For the 1st floor enter: http://128.187.43.79/ipps/JRCB160-HP9000

   

8. It will bring up an authentication box, here you will need to enter your Law School username and iPrint Password.

   

9. If you have successfully followed these steps you will then be brought to this screen. You will need to scroll down to HP in the left column. In the right column you will need to select LaserJet 9000 PCL 6 and click OK.

   

10. If you want this to be the printer that comes up by default select the box and then press Next, if not press Next.

    

11. Click Finish.

    

Congratulations you have successfully set up printing to the CO-OP or Pharos with Vista.